|
|
|
Dr. Sumit Gandhi |
|
Professor & HOD |
|
Education |
: B.Tech, M.Tech., Ph.D. |
|
E-mail |
: sumit.gandhi[AT]juet.ac.in |
|
Contact No. |
: Ext. - 109 |
|
|
|
|
|
|
Areas of Interest: His area of interest includes Open Channel Flow, Spillways, Sediment transport, Design of Hydraulic Structures, Water Resources and Cathodic Protection of RCC Structures. |
|
|
Brief Profile: |
|
Dr. Sumit Gandhi presently working as an Associate Professor & Head and completed his Ph.D from Motilal Nehru National Institute of Technology, Allahabad in 2009. His area of work during Ph.D was Flow Behavior in Prismatic and Non-Prismatic Open Channels. He has completed M.Tech in Water Resource from Motilal Nehru National Institute of Technology, Allahabad in 2004 and B.Tech in Civil Engineering from North Maharashtra University, Maharashtra in 2001. He has long teaching and research experience in the field of Civil Engineering. He has guided PhD and M.Tech thesis and various UG projects under his supervision in different fields of Civil Engineering.
He has published book and many research papers in peer-reviewed journals. He is also associated with many renowned International Journals as reviewer/ editorial board member and reviewed more than forty articles and book chapters. He has attended and presented many research papers in different international/national conferences in India and abroad. He is a life member of ISH, FMFP, IEI and IAENG.
Ph.D. Supervision
Completed - 01, Ongoing - 02
[1] YogeshIyer Murthy (153151), "Corrosion Mitigation of Structures Using Magnesium Alloys As Sacrificial Anodes", 2021.
[2] GarimaRawat (193D001), "Studies on Chloride Diffusivity in Concrete Using Alternate Materials". (ongoing)
[3] ShikhaPandey (203D002), "Cathodic Protection of RCC Structures". (ongoing)
M.Tech. Supervision
Completed - 01
[1] ShubhamJaiswal (172D001), "Computational Analysis of Carbon Fiber Based Hybrid Composite Plates", 2019.(Co-supervisor: Dr. Y. I. Murthy)
Research Association
[1] Editorial Reviewer's Board,Water Resources Management, Springer.
[2] Editorial Reviewer's Board, Journal of Applied Fluid Mechanics, ISSN 1735-3645, EISSN 1735-3645.
[3] Academic Editor, Advances in Research, SCIENCEDOMAIN International Journal (ISSN: 2348-0394).
[4] Editorial Board Member, Journal of Water Engineering, TULPAR Academic Publishing.
[5] Associate Editor, International Journal of Applied Research, ISSN Print: 2394-7500 | ISSN Online: 2394-5869 | CODEN: IJARPF.
[6] Editorial Board Member, Elixir Editorial Advisory Board, Elixir International Journal, ISSN: 2229 -712X.
[7] International Scientific Committee and Editorial Review Board Member, World Academy of Science, Engineering and Technology Journal.
[8] Editorial Reviewer's Board, Journal of Scientific Research and Reports, SCIENCEDOMAIN International Journal.
|
|
|
Publication@JUET Publication details google profile link
Patent Published
[1] "Effects of Water Cement Ratio and Curing Time on the Carbonation", (patent application No. 202231049079), Date of publication- 09th December 2022, (Co-authors: S. Sriram, Rakesh Kumar Pandey, S. Tiwari, R. Vaishnav, H. Namdeo, M. P. Karthik, A. Viswakarma, M. Prajapati, R. Nalawade).
[2] "Smart Device To Monitor The Construction Materials Management and Self-Phased Ordering of Building Materials", (patent application No. 202241051171 A), Date of publication- 16th September 2022, (Co-Authors: M. Chittaranjan, R.K.Goliya, K. Muniswamy S. N. Kumar, A. Verma, M. Verreddygari, R.D. Nalawade, Balachandiran P, N. Upadhye, P Joel Josephson, S. Kumar).
[3] "Sacrificial Anodes For Corrosion Mitigation of RCC Structures Using Mg-Ca-Y Alloys", (patent application No. 201821043948), Date of publication-22nd May 2020. (Co-author: Murthy Y.I.)
[4] "Sacrificial Anodes For Corrosion Mitigation of RCC Structures Using Mg-Ca-Nd Alloys", (patent application No. 201821043949), Date of publication-22nd May 2020. (Co-author: Murthy Y.I.)
Book Published
[1] "Studies on Hydraulic Jump In Prismatic And Non-Prismatic Channels", ISBN: 978-3-8465-1447-4, Lambert Academic Publishing, Saarbrücken Germany, 2011.(Co-author: R. P. Singh)
Journal Publication
[1] "A Critical Assessment of Nano Titanium Dioxide on Concrete Properties", Journal of Croatian Association of Civil Engineers, Gradevinar, volume 74 (2022), issue 7 (2022), pp. 553-560, ISSN: 1333-9095, DOI: https://doi.org/10.14256/JCE.3291.2021, (Co-authors: Murthy Y.I., Rawat Garima).
[2] "Influence of Nano-TiO2 on the Chloride Diffusivity of Concrete, Emerging Materials Research, ISSN 2046-0147 | E-ISSN 2046-0155, Vol.11, Issue 4 (2022), pp. 1-11, https://doi.org/10.1680/jemmr.22.00056, (Co-authors: Murthy Y.I., Rawat Garima).
[3] "Durability Aspects of Concrete Containing Nano Titanium Dioxide, ACI Materials, Vol 120, No. 2 (2023), (Co-authors: Murthy Y.I., Rawat Garima).
[4] "Strength and Rheological Aspects of Concrete Containing Nano Titanium Dioxide", Springer, Asian Journal of Civil Engineering, 23 (8), 2022, pp. 1197-1208, ISSN: 1563-0854, Springer, https://doi.org/10.1007/s42107-022-00476-2, (Co-authors: Murthy Y.I., Rawat Garima).
[5] "Influence on Properties of Concrete Due to Addition of Nano Titanium Oxide Particles: A Review Study", Vidyabharti International Interdisciplinary Research Journal (Special Issue), 2021, Vol. 4., ISSN 2319-4979, (Co-authors: Murthy Y.I., Rawat Garima).
[6] "Performance Evaluation of AZ91D as Sacrificial Anodes for Chloride Induced Corrosion in Reinforced Cement Concrete Slabs", Interciencia, vol. 45, Issue 9, 2020, pp 44-53. (Co-author:Murthy Y.I and Kumar A.)
[7] "Assessment of current and potential applications of Magnesium alloys in construction industry", Interciencia, Vol.45, Issue 5, 2020, pp 20-39. (Co-author:Murthy Y.I and Kumar A.)
[8] "Comparative Study of Pure Mg and AZ91D as Sacrificial Anodes for Reinforced Cement Concrete Structures in Chloride Atmosphere", Civil Engineering Journal, Vol.4, Issue 8, 2018, pp. 1750-59.(Co-author:Murthy Y.I and Kumar A.)
[9] "Corrosion Prevention of Steel Reinforcement in 7.5% NaCl Solution using Pure Magnesium Anode", In IOP Conference Series: Materials Science and Engineering, Vol. 330, Issue. 1, 2018, pp. 012003. (Co-author:Murthy Y.I and Kumar A.)
[10] "Synergic effect of cathodic protection and mineral admixture on the corrosion resistance of reinforcements in concrete", IOP Conference Series: Materials Science and Engineering. (Accepted)(Co-author:Murthy Y.I and Kumar A.)
[11] "Micro characterization of pure Mg and AZ91D used as sacrificial anodes in reinforced cement concrete", International Journal of Science Technology and Research, Vol.8, Issue 11, 2019, pp. 400-403. (Co-author:Murthy Y.I and Kumar A.)
[12] "Corrosion mitigation of reinforcement in concrete using pure Mg anodes", International journal of Recent Technology and Engineering, Vol.8, Issue 4, 2019, pp. 1950-56. (Co-author:Murthy Y.I and Kumar A.)
[13] "Mg alloy anodes for corrosion prevention of reinforcements in concrete", International Journal on Emerging Technologies, Vol.11, Issue 2, 2020, pp. 656-661. (Co-author:Murthy Y.I and Kumar A.)
[14] "Route and Mode Choice Analysis for Sustainable Transport through Multimodal Mobility Pattern in Hill Town of Shimla", JUET Research Journal of Science andTechnology, 5(1), 14-26, ISSN: 2321-6026, 2019.(Co-author:Sharma P and Dharmendra)
[15] "Comparative Study of Pure Mg and AZ91D as Sacrificial Anodes for Reinforced Cement Concrete Structures in Chloride Atmosphere", Civil Engineering Journal, Vol. 4, No. 8, PP. 1750-1759, August, 2018, ISSN: 2476-3055, DOI: 10.28991/cej-03091110.(Co-author:Murthy Y.I and Kumar A.)
[16] "Corrosion Prevention of Steel Reinforcement in 7.5% NaCl Solution using Pure Magnesium Anode", IOP Conf. Series: Materials Science and Engineering, Vol. 330, Issue 1, 2018, pp. 012003, doi:10.1088/1757-899X/330/1/012003, ISSN: 1757-899X. (Co-author:Murthy Y.I and Kumar A.)
[17] "Effect of Corrugated Bed on Flow Characteristics in Rectangular Open Channel", World Journal of Technology, Engineering and Research (WJTER), open access, 1 (3), 350-358, 2018.
[18] "Empirical Formulation of Flow Characteristics in Trapezoidal Channels", Journal of The Institution of Engineers (India), Springer, 97(3):247-253, DOI: 10.1007/s40030-016-0153-3, e-ISSN: 2250-2157, 2016. (Co-author:R P Singh)
[19] "Bed Load and Shear Stress in Open Channel Sediment Flow", Elixir International Journal, Elixir Civil Engineering 91 (2016), 38310-38314, ISSN: 2229-712X, 2016. (Co-author:Singh M and Pal D)
[20] "Analysis of Supercritical Flow In Suddenly Expanding Channel", International Journal of Fluid Mechanics Research, ASTFE, Vol. 41 (3), 194-220, DOI: 10.1615/InterJFluidMechRes.v41.i3.20, ISSN: 2152-5102, 2014.
[21] "Characteristics of Hydraulic Jump", International Science Index, World Academy of Science, Engineering and Technology, Vol. 8 (4), 692-697, 2014.
[22] "Characteristics of supercritical flow in rectangular channel", International Journal of Physical Sciences, Vol. 8 (40), 1934-1943, DOI: 10.5897/IJPS2013.4032, ISSN 1992 - 1950, (eISSN 2305-3925 | pISSN2410-4477), 2013. (Co-author:Yadav V)
[23] "Identification of Principal Hydraulic Jump Characteristics in Prismatic and Non-Prismatic Channels: Principal Component Analysis", International Journal of Water Resources and Environmental Management,Vol. 2 (1),77-89, ISSN: 2229-5933, 2011.(Co-author: R P Singh)
Conference Publication
[1] "Effect of addition of sugarcane bagasse ash on half-cell potential of cathodically protected RCC structures subjected to chloride ingress", Second International Conference on Construction Materials and Structures (ICCMS-2022), Jointly organized by Virginia Tech, NIT Calicut, University of BATH, Monash University,UNSW Sydney, Purdue University and BITS Pilani, 13-17th December 2022, (Co-authors: Murthy Y.I., Shikha Pandey).
[2] "Crystallographic Study of Solid Solutions In The Mg-Ca-Nd Ternary System at 400°C", International Conference on Advancements in Interdisciplinary Research, Theme: Smart and Sustainable Society, 6th - 7th May 2022, MNNIT Allahabad, Prayagraj, (Co-authors: Murthy Y.I., Kumar A.).
[3] "Influence on Properties of Concrete Due to Addition of Nano-Titanium Dioxide Particle: A Review Study", ISSN: 2319-4979, International Conference on "Research & Innovation Perspectives in Engineering (ICRIPE-2021), Govt. Engineering College Nagpur, 29-31st July 2021, (Co-authors: Murthy Y.I., Rawat Garima).
[4] "Synergic effect of cathodic protection and mineral admixture on the corrosion resistance of reinforcements in concrete", Community Based Research and Innovations in Civil Engineering (CBRICE-2021), held on 18-19th March 2021.(Co-author: Murthy Y.I).
[5] "Geotextile Filters in Earthen Dam- A Review Study on Construction and Rehabilitation", International Conference on Smart Technologies for Energy, Environment & Sustainable Development-2020 (ICSTEESD-20) held on 4th - 5th December 2020.(Co-author:H. K. Trivedi and N.Choudhari)
[6] "A critical Review on the use of sugarcane bagasse ash in cement mortar and concrete", Recent Development in Cement Composites, (RDCC-2018), 24-25thAug. 2018. (Co-author:Murthy Y.I and Kumar A.)
[7] "Stepped Cascade as an Energy Dissipator: A Survey And Perspective", 33rd Indian Engineering Congress 21st-23rd Dec 2018, The Institution of Engineers (India) Udaipur, CV/053/10, 141-145, ISBN NO: 978-81-938404-9-8.(Co-author:A. Joshi, S.Jaiswal and S. Sharma)
[8] "Electrical based Approaches in Defluoridation", IEEE International Conference, Recent Advances in Engineering, Technology and Computational Sciences (RAETCS-2018) held during 06 - 08 Feb, 2018 at SHUATS, Allahabad, Paper ID-134.(Co-author:Shiva Shankar Y, N.Samaiya and D. Mohan)
[9] "Flow Behavior Over Ogee And Stepped Spillway Under Different Flow Conditions: An Empirical Approach", Proceedings of The 37th IAHR World Congress, 13th-18th August 2017, Kuala Lumpur, Malaysia, IAHR, 1192-1199, ISSN: 2521-716X (Online), 2521-7119 (Print), 2521-7127 (USB).(Co-author:K.Sachdeva, M.Khandelwal, R. Rai, V. Singh, S.Srivastava, S. P.Meena).
[10] "Corrosion prevention of steel reinforcement in 7.5% NaCl solution using pure Magnesium anode", International Conference on Recent Advances in Materials, Mechanical and Civil Engineering (ICRAMMCE-2017) MLRITM, Hyderabad, Telangana, 1-3 June, 2017, MAT-1150 (66), ISSN: 1757-899X.(Co-author:Murthy Y.I and Kumar A.)
[11] "Review on Stepped Spillway and Baffle Blocks as Energy Dissipatorin Gravity Dams", 4th International Conference on "Challenges in Environmental Science and Technology [IC-CEST 2016], SVU Sagar M.P., 27-28 February 2016, Ref: Conf./SVNU/2016/PP-138. DOI: 10.13140/RG.2.1.4790.6966.(Co-author:Mishra D)
[12] "Hydraulic Jump Characteristics in Non-Prismatic Channels", Proceedings of 5th IAHR International Symposium on Hydraulic Structures ISHS-2014 and 11th National Conference on Hydraulics in Civil Engineering, Brisbane, Australia, 25-27 June 2014, ISBN: 9781742721156, DOI: 10.14264/uql.2014.14, 1-9. (Co-author:R. P. Singh)
[13] "Experimental Analysis of Sediment Transport",Proceedings of the Fortieth National Conference on Fluid Mechanics and Fluid Power, 12-14 Dec 2013, NIT Hamirpur, H.P., India, 1513-1521.
[14] "Waste to Energy Recovery from Urban Solid Waste - A Case Study For Delhi City", Proceedings of the National Conference on "Environmental Sustainability And Society: The Growing Paradigm Shift (ESS - 2013), 30-31st March 2013, JUET Guna, M.P. India.(Co-author:Gautam G and Dharmendra)
[15] "Significance Of Hydraulic Jump For Design Of Stilling Basin: An Overview", Proceedings of the Thirty Ninth National Conference on Fluid Mechanics and Fluid Power (FMFP2012)-78, ISBN: 978-81-925-494-0-8, December 13-15, 2012, SVNIT Surat, Gujarat, India.
[16] "Characteristics of Hydraulic Jump: Horizontal Rectangular Channel", Proceeding of the Civil Engineering Conference, Recent Advancements In Civil Engineering & Infrastructure Development (RACE-InD 2011), JUET Guna, 21-22nd Dec 2011, H-15 - H-25.(Co-author:Yadav V and Naseem S)
[17] "GIS Approach In Watershed Planning And Management: An Overview", Proceeding of the Civil Engineering Conference, Recent Advancements In Civil Engineering & Infrastructure Development (RACE-InD 2011), JUET Guna, 21-22nd Dec 2011, H-1 - H-5.(Co-author:Shukla R and Sharma R S)
[18] "Experimental Study of Repelled Hydraulic Jump", Proceeding of the Civil Engineering Conference-Innovation without Limits (CEC-09), NIT Hamirpur, 18-19th Sep 2009, 401-407.(Co-author:Dharmendra)
[19] "Experimental Study onthe Characteristics of the Hydraulic Jump inan Abruptly Expanding Channel with Appurtenances",Proceeding on "An International Perspective on Environmental and Water Resources, ASCE (EWRI), IIT Kanpur, 18-20th Dec 2006, 165-174.(Co-author:Mehta R C and Agarwal V C)
[20] "Experimental Study On The Characteristics Of The Hydraulic Jump In An Abruptly Expanding Channel", Proceeding of "15th Congress of Asia and Pacific Division of the International Association for Hydraulic Research and International Symposium on Maritime Hydraulics, IAHR, IIT Chennai, 7-10th Aug 2006, (1), 17-22.(Co-author:Mehta R C and Agarwal V C)
[21] "Analytical Solution for the Characteristics of Hydraulic Jump in an Abruptly Expanding Rectangular Channel", Proceeding of the International Symposium on Recent Advances in Water Resources Development and Management (RAWRDM), IIT Roorkee, 23-25th Nov 2005, (II), 810-820.(Co-author:Mehta R C and Agarwal V C)
[22] "A Theoretical Study of Solid-Liquid Interaction: Diffusion Phenomenon Approach", 32nd National Conference on Fluid Mechanics and Fluid Power, College of Engineering Osmanabad, 15-17th Dec 2005.(Co-author:R C Mehta)
[23] "Whishker-Reinforced Sandwich Composite Modeled Elastic Foundation", Third International Conference on High Performance Structures and Materials (HPSM-2006), Ostend, Belgium, 3-5th May 2006.(Co-author:K M Gupta)
[24] "Experimental Investigation of Friction Factor and Bend Loss Coefficient in Pneumatic Transportation of Coal-Powder",National Conference on "Advances in Mechanical Engineering (AIME-2006)held on 20-21st Jan 2006 at"JamiaMilliaIslamia University, New Delhi.(Co-author:R C Mehta)
|
|
|
|