Dr. Dhananjay R. Mishra is an associate professor at Jaypee University of Engineering and Technology in the Department of Mechanical Engineering. He obtained his Bachelor's degree in Mechanical Engineering) from Amravati University (M.S.), Master's degree (Production Engineering, Mech.Engg.) in 2007, from BIT, Durg of Pt. Ravi Shankar Shukla University, Raipur (C.G.), and Doctor of Philosophy in Mechanical Engineering from the National Institute of Technology Raipur (NITRaipur), Raipur, in August 2016.

His past affiliations include Suprabha Industries Ltd., Lucknow, as an Assistant Production Manager, Lecturer in the Department of Mechanical Engineering of Rungta College of Engineering and Technology, Bhilai, C.G., Lecturer in the Department of Mechanical Engineering of Shri Shankaracharya College of Engineering and Technology, Bhilai, C.G. and, Assistant Professor in Department of Mechanical Engineering of Disha Institute of Management & Technology, Raipur.

He has established State Level Energy Park at DIMAT, funded by MNRE through Nodal agency CREDA, and completed a research project titled "Determination of the parameters affecting heat transfer between the ground and fully or partially underground structures" sponsored by Chhattisgarh Council of Science and Technology at Disha Institute of Management & Technology, Chhattisgarh.

He has also successfully discharged responsibilities as an observer for different CSVTU, AIEEE, and PMT examination centres.

EDITOR OF PEER REVIEWED INTERNATIONAL JOURNAL

• International Journal of Thermodynamics & Catalysis, Gavin Publishers 5911 Oak Ridge Way, Lisle, IL 60532, USA.

ASSOCIATE EDITOR OF PEER REVIEWED INTERNATIONAL JOURNAL

• International Journal of Applied Research (ISSN Print: 2394-7500 | ISSN Online: 2394-5869 | CODEN: IJARPF) [ Ref: AKINIK/LM/1]

Ph.D. Supervisions:

Defended:

1. Manoj Dubey (153205) Solar Thermal Applications, Jaypee University of Engineering & Technology, Guna, defended on 02/06/202.
2. Pankaj Dumka (173E001) Desalination of water using modified form of the single-slope solar still and double slope long still, Jaypee University of Engineering & Technology, Guna, thesis defended on 3rd April., 2021.
3. Mayank Sharma (14319006) Simulation of Heat and Mass Transfer within the Novel Solar Stills, National Institute of Technology Raipur, thesis defended on 9th Mar, 2021.
4. Girish Dutt Gautam (153202) Experimental investigations and multi-response optimization in pulsed Nd:YAG laser cutting of novel FRP composite materials, Jaypee University of Engineering & Technology, Guna, thesis defended on 15th Feb, 2020.

Ongoing:

1. Amiya Kumar Sahoo (193E001) Optimization of process parameters of an advanced machining process, Jaypee University of Engineering & Technology, Guna.
2. Ram Kumar (213E002) Solar water desalination, Jaypee University of Engineering and Technology, Guna

M. Tech. Thesis Guidance

1. Mayank Garg (162E001), "Multi-response optimization of EDDM for a Hastelloy", defended in May 2018)
2. Vivek Tiwari (142407),"Parametric optimization of EDM for Monel K-500 material", defended in 2016.
3. Priyaranjan Sharma (112603), "Multi-Response Optimization of EDM Parameters for INCONEL 600 and INCONEL 718", defended in 2013.

Publication details google profile link

Patents granted/published:

1. Mishra, D. R. Earth Solar Still Augmented with the Sandbag and Black Dust Cloth Covered Perforated Floating Plate. IN Patent 201,924,054,660 January 2023.

2. Mishra, D. R.; Dumka, P.; Sharma, S. Solar Distiller. IN Patent App. 362811-001 2023.

3. Mishra, D. R.; Puharta, Y. T. Atmospheric Water Generator. IN Patent App. 364878-001 May 2023.

4. Mishra, D. R.; Bisht, R.; Sahoo, A. K. Composite Laminate. IN Patent App. 363695-001 2023.

5. Shrivastava, A.K.. Mishra D. R., Saini, F., Beohar, I., Zehra,I., SEED AND FERTILIZER SPRAYER DRONE, IN Patent App 385527-001 2023

Patents Filed:

1. Mishra, D. R.; Srivastava, A. K.; Mehto, H. K.; Rajpoot, V. S.; Singh, R. K.; Arora, N. S.; Singh, J. SMART BIN. IN Patent App. 366189-001 June 16, 2022. [Examination Report has been Generated ,Online Reply Document Recived(FER generated on 30/09/2022)]

2. Mishra, D. R.; Dumka, P.; Sharma, S. Solar Distiller Device. IN Patent App. 364171-001 May 2022. [Application Status: Case is in Amended Case of Controller]

3. Mishra, D. R.; Dumka, P.; Sharma, S. DM Irrigation Device. IN Patent App. 363786-001 2022. [Application Status:At Technical Examination of Amended Application(FER generated on 23/06/2022)]

4. Mishra, D. R.; AwanaPuharta, Yugank T., H.; Yadav, S.; Tiwari, S. Air Water Distiller. IN Patent 365693-001 June 2022. [Application Status:Examination Report has been Generated,Case is Waiting for Examination Report Reply (FER generated on 29/09/2022)]

5. Mishra, D. R.; Dumka, P.; Sharma, S. Knurled Pencil. IN Patent App. 362880-001 2022. [Application Status: Examination Report has been Generated, Case is Waiting for Examination Report Reply (FER generated on 28/06/2022)]

6. Mishra, D. R.; Dumka, P.; Gautam, H.; Sharma, S. Solar Distiller. IN Patent App. 364198-001 May 2022. [Application Status:Examination Report has been Generated,Case is Waiting for Examination Report Reply (FER generated on 30/06/2022)]

Book Published:

• P. Dumka, R. Dumka and D. R. Mishra, “Numerical Methods using Python (For scientists and Engineers)”, BlueRose One, ISBN: 978-93-5704-464-6

Book Chapters Published:

1. G.D. Gautam, D. R. Mishra, “Pulsed Nd:YAG Laser Cutting: Accuracy Improvement and Parametric Influences,” In Kibria G., Bhattacharyya B. (eds.) Accuracy Enhancement Technologies for Micromachining Processes, Lecture Notes in Mechanical Engineering. Springer, Singapore, pp. 109-119

21 Feb. 2020, https://doi.org/10.1007/978-981-15-2117-1_6(ISBN 978-981-15-2117-1) [Springer, Singapore]

2. D. R. Mishra, M.S. Sodha, A.Dixit, “Validation of basis of experimental simulation of heat transfer between a building and surrounding earth,” Proceedings of International Conference on Energy Security, Global Warming and Sustainable Climate, Solaris-2012, ST-12, pp. 534-546, 2012 (ISBN 978-93-82332-03-9) [New Delhi: I.K. International,]

3. P.Dumka, R. Rathor, S.Sharma, K. Katiyar, H. Gautama, C. Gunawat and D. R. Mishra. “Impact of Coconut Husks on the Productivity of Conventional Solar Still: A Heat Transfer Study”,. Current advances in Geography, Environmental and Earth Sciences, Vol. 4, June 2022, 1-14 (DOI: 10.9734/bpi/cagees/v4/2542B) [B.P. International]

JOURNALS:

1. Sahoo, A. K., & Mishra, D. R. (2023). Parametric optimization of response parameter of Nd-YAG laser drilling for basalt-PTFE coated glass fibre using genetic algorithm. Journal of Engineering Research. https://doi.org/10.1016/j.jer.2023.07.014

2. Mishra, P., Tewari, P., Mishra, D. R., Dumka, P. (2023). Integration based on Monte Carlo Simulation. I. J. Mathematical Sciences and Computing, 58–65. https://doi.org/10.5815/ijmsc.2023.03.05

3. Mishra, P., Tewari, P., Mishra, D. R., & Dumka, P. (2023). Numerical modelling of double integration with different data spacing : A Python-based approach. 4(2), 46–54. https://doi.org/10.30511/MCS.2023.1990951.1115

4. K. Gajula, Y.Raghuvanshi, P. Mishra, D. R. Mishra, P. Dumka, (2023). Modelling One Dimensional Steady State Heat Conduction Problem Using Monte Carlo Simulation: A Python View Point. https://doi.org/10.5281/zenodo.7756159

5. P. Mishra, , A. Sharma, D.R. Mishra, P. Dumka, (2023). Solving Double Integration With The Help of Monte Carlo Simulation: A Python Approach. International Journal of Scientific Research in Multidisciplinary Studies, 9(3), 6–10. https://doi.org/10.26438/ijsrms/v9i3.610

6. Dumka, P., Samaiya, N., Gandhi, S., Mishra, D.R. (2023). Modelling of Hardy Cross Method for Pipe Networks. International Journal of Mechanical Engineering (2), 1–8. https://doi.org/10.14445/23488360/ijme-v10i2p101.

7. A.R. Joshi, A. Deo, A. Parashar, D.R. Mishra, P. Dumka (2023)Modelling Steam Power Cycle using Python, International Journal of Scientific Research in Computer Science, Engineering and Information Technology, 9(1), 152-162, https://doi.org/10.32628/CSEIT228671

8. Kumar, R., Mishra, D. R., ; Dumka, P. (2023)Development of a time marching based heat transfer algorithm to predict the distillate output from a conventional solar still https://ssrn.com/abstract=4474069

9. S.Gandhi, P.Dumka, N. Samaiya, D.R. Mishra, (2023). Modelling of Hardy Cross Method for Pipe Networks. SSRG International Journal of Mechanical Engineering, 10, 1–8. https://doi.org/10.14445/23942568/IJME-V10I2P101

10. P. Dumka, D.R. Mishra, (2022). Understanding the TDMA/Thomas algorithm and its Implementation in Python. In International Journal of All Research Education and Scientific Methods (IJARESM) (Vol. 10, Issue 10).

11. R. Chauhan, P. Dumka , D. R. Mishra (2022) Experimental Evaluation and Development of Artificial Neural Network Model for the Solar Stills Augmented with the Permanent Magnet and Sandbag, Journal of Advanced Thermal Science Research,9, 9-23 https://doi.org/10.15377/2409-5826.2021.08.1

12. R. Chauhan, P. Dumka , D. R. Mishra (2022) Modelling conventional and solar earth still by using the LM algorithm-based artificial neural network, International Journal of Ambient Energy, 43:1, 1389-1396, https://doi.org/10.1080/01430750.2019.1707113

13. A. Deo, A. R. Joshi, A. Parashar, D. R. Mishra, P. Dumka (2022) Analysing One Dimensional Tapered Pin-Fin using Finite Difference, Research and Applications of Thermal Engineering, 5:1., 1-6. https://doi.org/10.5281/zenodo/.6424500

14. P. S. Pawar, D. R. Mishra, P. Dumka (2022) Solving First Order Ordinary Differential Equations using Least Square Method: A comparative study, International Journal of Innovative Science and Research Technology, 7:3, 857-864

15. P. Dumka, R. Chauhan, A. Singh, G. Singh, D. R. Mishra (2022). Advances in Engineering Software Implementation of Buckingham ’ s Pi theorem using Python. Advances in Engineering Software, 173(July), 103232. https://doi.org/10.1016/j.advengsoft.2022.103232

16. K. Gajula, V. Sharma, D. R. Mishra, P. Dumka (2022). First Law of Thermodynamics for Closed System: A Python Approach, Research and Applications of Thermal Engineering, BHRP, 5(3), 1-10.

17. P. Dumka, R. Rathor, K. Katiyar, D. R. Mishra (2022)Techno-economic investigation of passive solar still augmented with permanent magnets and ultrasonic fogger,Int. J. Renewable Energy Technology, 13(3), 285-305.

18. P. Dumka, P. S. Pawar, A. Sauda, G. Shukla, D. R. Mishra (2022). Application of He's homotopy and perturbation method to solve heat transfer equations: A python approach, Advances in Engineering Software, 170, 103160.

19. P. S. Pawar, D. R. Mishra, P. Dumka (2022) Obtaining exact solutions of visco-incompressible parallel flows using python, International Journal of Engineering Applied Sciences and Technology, 6(11), 213-217.

20. P.Dumka, A. Singh, G. P. Singh, D.R. Mishra (2022). Kinematics of Fluid: A Python Approach, International Journal of Research and Analytical Reviews (IJRAR), 9(2), 131-135.

21. P. Dumka, K. Gajula, V.Sharma, B.Sharma, D. R. Mishra (2022). Modelling of Energy in Transit Using Python, International Journal of Innovative Science and Research Technology, 7(8), 1152-1156.

22. P. Dumka, K. Rana, S. P. S. Tomar, P. S. Pawar, D. R. Mishra, (2022). Modelling air standard thermodynamic cycles using python. Advances in Engineering Software, 172, 103186.

23. Y. Raghuvanshi, D.R. Mishra, P. Dumka (2022). Modelling Logic Gates in Python,IJFMR-International Journal For Multidisciplinary Research, 4, 5, 1-8

24. P.Dumka, A. Deo, K. Gajula, V. Sharma, R. Chauhan, D. R. Mishra(2022)Load and Load Duration Curves Using Python, International Journal of All Research Education and Scientific Methods (IJARESM), 10(8), 2127-2134.

25. Y. Raghuvanshi, D. R. Mishra, P. Dumka (2022). Understanding Sets with the help of Python, International Journal of Novel Research and Development, 7(10), 136-142.

26. P. Dumka, K. Gajula, V. Sharma, D. R. Mishra (2022). Modelling pipe flow using Python, International Education & Research Journal, 8(10), 4-7.

27. P. Dumka, H. Gautam, S. Sharma, C. Gunawat, D. R. Mishra (2022) Impact of Sand Filled Glass Bottles on Performance of Conventional Solar Still, Journal of Basic & Applied Sciences, 18, 8-15, DOI: https://doi.org/10.29169/1927-5129.2022.18.02

28. P. Dumka, S. Sharma, H.Gautam, D. R. Mishra (2022) Finite Volume Modelling of an Axisymmetric Cylindrical Fin using Python, Research and Applications of Thermal Engineering, 4:3, 1-11, DOI: https://doi.org/10.5281/zenodo.6345803

29. A. K.Sahoo, P. Pandey, D. R. Mishra (2021) Multi-response optimization of EDM drilling parameters of the Nitinol SMA, The Journal of Engineering and Exact Sciences, 7,4 13007-01-17e T HURTS: https://doi.org/10.18540/jcecvl7iss4pp13007-01-17e

30. P. Dumka, D. R. Mishra, “Energy, exergy and techno-economic analysis of novel solar stills for sea coastal area,”, International Journal of Ambient Energy, Jun 2021

https://doi.org/10.1080/01430750.2021.1945489 [Print ISSN: 0143-0750 Online ISSN: 2162-8246][ESCI] 31. M. Dubey, D.R. Mishra, “Experimental analysis of double slope solar still augmented with dye, pebbles and metal chips”, Environmental Science and Pollution Research, vol.28, pp.2207-22090, Jan 2021. https://doi.org/10.1007/s11356-020-11869-83 [Impact Factor: 4.306]

32. P. Dumka, R. Chauhan, D. R. Mishra, “Experimental and theoretical evaluation of a conventional solar still augmented with jute covered plastic balls,” Journal of Energy Storage, vol.32, p.101874, Dec. 2020 https://doi.org/10.1016/j.est.2020.101874 [ISSN: 2352-152X] [Impact Factor: 6.583]

33. M. Sharma, A. K. Tiwari, D. R. Mishra, “Experimental evaluation theoretical analysis of the long stills covered with the GI, Cu and Al sheets,” FME Transactions, vol. 48, no.4, pp. 931–7, 2020. https://doi.org/10.5937/fme2004931S [ISSN: 1451-2092]

34. P. Dumka, D. R. Mishra, “Experimental investigation and thermal analysis of a double slope long still : Study of heat and mass transfer,” International Journal of Ambient Energy, pp.1-9, Sep 2020, https://doi.org/10.1080/01430750.2020.1818128 [Print ISSN: 0143-0750 Online ISSN: 2162-8246][ESCI]

35. P. Dumka, A. Jain, D. R. Mishra, “Energy, exergy, and economic analysis of single slope conventional solar still augmented with an ultrasonic fogger and a cotton cloth,” Journal of Energy Storage, vol. 30, p. 101541, May 2020. https://doi.org/10.1016/j.est.2020.101541 [ISSN: 2352-152X] [Impact Factor: 6.583](SCI)

36. M. Dubey, D. R. Mishra, “Thermo-exergo-economic analysis of double slope solar still augmented with ferrite ring magnets and GI sheet”, Desalination and water treatment, vol.198, pp.19-30, April 2020. https://doi.org/10.5004/dwt.2020.25947 [ISSN Print 1944-3994, ISSN Online 1944-3986] [Impact Factor: 1.234]

37. R. Chauhana, S. Sharma, R. Pachauri, P. Dumka, D. R. Mishra, “Experimental and theoretical evaluation of thermophysical properties for moist air within solar still by using different algorithms of artificial neural network,” Journal of Energy Storage, vol. 30, p.101408, April 2020. https://doi.org/10.1016/J.EST.2020.101408. [ISSN: 2352-152X] [Impact Factor: 6.583][SCI]

38. D. R. Mishra, H. Jain, N. Kumar, M. S. Sodha, “Experimental evaluation of solar integrated water heater,” Scientia Iranica (B), 27(4), pp. 1878-1885, 2020. https://doi.org/10.24200/SCI.2019.50071.1510 [Print ISSN1026-3098, Online ISSN2345-3605] [SCIE] [Impact Factor: 1.435]

39. G.D. Gautam ,D.R. Mishra, “Parametric Investigation in Pulsed Nd:YAG Laser Cutting of Kevlar-Basalt Fiber Composite,” Lasers in Manufacturing and Materials Processing, vol. 7 , no.4 , pp. 373-398, 2020. https://doi.org/10.1007/s40516-020-00125-z [Electronic ISSN: 2196-7237, Print ISSN: 2196-7229] [Scopus]

40. D. R. Mishra, A. Bajaj, R. Bisht, “Optimization of multiple kerf quality characteristics for cutting operation on carbon–basalt–Kevlar29 hybrid composite material using pulsed Nd:YAG laser using GRA,” CIRP Journal of Manufacturing Science and Technology, vol. 30, pp. 174-183, 2020. https://doi.org/10.1016/j.cirpj.2020.05.005 [Impact factor: 3.602] [SCIE][ ISSN: 1755-5817]

41. G. D. Gautam, D. R. Mishra, “Multiple kerf quality optimization in Nd : YAG laser cutting of BFRP composite using grey relational based genetic algorithm,” FME Transactions, vol.48, no.3, pp. 636–650, 2020. https://doi.org/10.5937/fme2003636G [ISSN: 1451-2092]

42. P. Dumka, D. R. Mishra, “An estimation of the distillate output from a CSS based on multivariable regression analysis,” International Journal of Ambient Energy, 2020. https://doi.org/10.1080/01430750.2020.1736625 [Print ISSN: 0143-0750 Online ISSN: 2162-8246][ESCI]

43. P. Dumka, D.R. Mishra, “Comparative experimental evaluation of conventional solar still (CSS) and CSS augmented with wax filled metallic finned-cups,” FME Transactions, vol. 48 no. 2, pp. 482–495, 2020. https://doi.org/10.5937/FME2002482D [ISSN: 1451-2092]

44. D. R. Mishra, G. D. Gautam, D. Prakash, A. Bajaj, A. Sharma, R. Bisht, S. Gupta, “Optimization of Kerf Deviations in Pulsed Nd : YAG Laser Cutting of Hybrid Composite Laminate Using GRA,” FME Transactions, 48 (1), 109–116, 2020. https://doi.org/10.5937/fmet2001109M [ISSN: 1451-2092]

45. P. Dumka, D.R. Mishra, “Performance evaluation of single slope solar still augmented with the ultrasonic fogger,” Energy, vol.190, p.116398, 2020. https://doi.org/10.1016/j.energy.2019.116398 [ISSN :0360-5442][Impact factor: 7.147] [SCI]

46. G. D. Gautam, D. R. Mishra, “Firefly algorithm based optimization of kerf quality characteristics in pulsed Nd : YAG laser cutting of basalt fiber reinforced composite,” Composite Part B: Engineering, vol.176, p.107340, 2019. https://doi.org/10.1016/j.compositesb.2019.107340 [ISSN: 1359-8368][Impact Factor: 9.078][SCI]

47. P. Dumka, A. Sharma, Y. Kushwah, A. S. Raghav, D. R. Mishra, “Performance evaluation of single slope solar still augmented with sand-filled cotton bags,” Journal of Energy Storage, vol.25, p.100888, 2019. https://doi.org/10.1016/j.est.2019.100888 [ISSN: 2352-152X][IF:6.583][SCI]

48. D. R. Mishra, “Experimental Evaluation of Shape Factor of Axis Symmetric Sunken Structures,” Scientia Iranica, vol.27, iss.6, no.6, pp.2831-2837, Dec.2020 https://doi.org/10.24200/sci.2019.50181.1559 [Print ISSN: 1026-3098, Online ISSN: 2345-3605] [SCIE] [Impact Factor: 1.435]

49. G. D. Gautam, D. R. Mishra, “Dimensional accuracy improvement by parametric optimization in pulsed Nd:YAG laser cutting of Kevlar29/basalt fiber reinforced hybrid composites,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 41, no. 284, pp.1-22, June 2019. https://doi.org/10.1007/s40430-019-1783-y [Electronic ISSN: 1806-3691, Print ISSN:1678-5878] [Impact factor: 2.220] [SCIE]

50. P. Dumka, Y. Kushwah, A. Sharma, D.R. Mishra, “Comparative analysis and experimental evaluation of single slope solar still augmented with permanent magnets and conventional solar still,” Desalination, vol. 459 , pp. 34–45, June 2019. https://doi.org/10.1016/j.desal.2019.02.012 [ISSN: 0011-9164] [Impact factor:9.501] [SCI]

51. M. Sharma, A. K. Tiwari, D. R. Mishra, “Experimental evaluation of a long still with Galvanized Iron sheet as condensing cover at different basin water flow rate : study of heat and mass transfer,” International Journal of Ambient Energy, May. 2019. https://doi.org/10.1080/01430750.2019.1621199 [Print ISSN: 0143-0750 Online ISSN: 2162-8246][ESCI]

52. P. Dumka, D. R. Mishra, “Influence of salt concentration on the performance characteristics of passive solar still,” International Journal of Ambient Energy, May 2019. https://doi.org/10.1080/01430750.2019.1611638 [Print ISSN: 0143-0750 Online ISSN: 2162-8246][ESCI]

53. M. Dubey, D. R. Mishra, “Experimental and Theoretical evaluation of double slope single basin solar stills: A study of heat and mass transfer,” FME Transactions, vol. 47(1):101–110. 2019 https://doi.org/10.5937/fmet1901101D [ISSN: 1451-2092]

54. M. Sharma, A. K.Tiwari, P. Dumka, D. R. Mishra, “Performance evaluation of long still for the utilization of industrial hot waste water,” Journal of Energy Storage, vol.20, pp. 485–91, 2018. https://doi.org/10.1016/J.EST.2018.10.023 [ISSN: 2352-152X][Impact Factor: 6.583] [SCI]

55. P. Dumka, D. R. Mishra, “Experimental investigation of modified single slope solar still integrated with earth (I) &(II): Energy and exergy analysis,” Energy, vol.160, pp.1144–57, 2018. https://doi.org/10.1016/j.energy.2018.07.083 [ISSN: 0360-5442] (IF: 7.147)

56. P. Dumka, D. R. Mishra, “Energy and exergy analysis of conventional and modified solar still integrated with sand bed earth: Study of heat and mass transfer,” Desalination, vol. 437,pp. 15-25. July 2018 https://doi.org/10.1016/j.desal.2018.02.026 [Impact factor: 9.501] [ISSN: 0011-9164}

57. M. Sharma, A. K. Tiwari, D. R. Mishra, “Sand Bed Solar Stills for Coastal Areas : Studying Heat and Mass Transfer using ANN Model,” International Journal of Engineering Research in Mechanical and Civil Engineering, vol. 3, no.1, pp. 497–501, 2018. [ISSN(Online): 2456-1290]

58. K. Hidouri, D. R. Mishra, “Experimental Evaluation of Influence of Air Injection Rate on a Novel Single Slope Solar Still Integrated with an Air Compressor,” Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering, vol. 17, Issue 3(Ver. 1), pp. 30–39, Aug, 2017.[ISSN:2249-4596]

59. K. Hidouri, A. Benhmidene, B. Chouachi, D. R. Mishra, Ammar Houas, “Adsorption of Phenolic Compounds on Activated Carbon DSAC36-24,” World Academy of Science, Engineering and Technology, vol. 11, no. 8, pp. 601–606, Aug., 2017. https://doi.org/10.1999/1307-6892/70701 [ISSN 1307-6892]

60. K. Hidouri, D. R. Mishra, A. Benhmidene, and B. Chouachi, “Experimental and theoretical evaluation of a hybrid solar still integrated with an air compressor using ANN,” Desalination and Water Treatment, vol. 88, pp. 52–59, September 2017.https://doi.org/10.5004/dwt.2017.21333 [ISSN Print 1944-3994, ISSN Online 1944-3986] [Impact Factor: 1.234]

61. M. Sharma, A. K. Tiwari and D. R. Mishra, “A review on desalination of water using single slope passive solar still,” International Journal of Development Research, vol. 06, Issue, 11, pp.10002-10012, November, 2016.[ISSN:2230-9926] [ISSN: 2230-9936]

62. D. R. Mishra, A.K. Tiwari, M.S. Sodha, “Mathematical modeling and evaluation of new long single slope still for utilization of hot waste water,” Applied Thermal Engineering, vol. 108, pp. 353–357. Sep., 2016. https://doi.org/10.1016/j.applthermaleng.2016.07.153 [Impact factor: 5.295] [ISSN: 1359-4311]

63. V. Tiwari, D. R. Mishra, “Multi response optimization of EDM parameters for MONEL K-500,” International Journal of Advances in Production and Mechanical Engineering, vol.2 issue 4, pp. 53-60. July, 2016. [ISSN:2394-6210]

64. K. Murari, D. R. Mishra, D. K. Shukla, B. Jha, J.Talwar, “Performance evaluation of concrete containing polypropylene and recron fiber as additive,” Journal of Scientific and Technical Research, vol. 4, no.2, pp. 44-49. 2017 [ISSN:2278-3350]

65. M. S. Sodha, D. R. Mishra and A.K. Tiwari, “Solar Earth water Still for Highly Wet ground,” Journal of Fundamentals of Renewable Energy and Applications, vol.4 Issue 1,. 2014 https://doi.org/10.4172/2090-4541.1000e103 [ISSN: 2090-4541][Impact Factor: 1.41]

66. D. R. Mishra, A. K. Tiwari, “Productivity enhancement of single slope solar still using ground energy,” Journal of Scientific and Technical Research, vol. 6, no.2 pp. 28-34. 2017. [ISSN:2278-3350]

67. P. Sharma, S. Singh, D. R. Mishra, “Electrical Discharge Machining of AISI329 Stainless Steel Using Copper and Brass Rotary Tubular Electrode,” Procedia Material Science. vol. 5, pp. 1771-1780, 2014 https://doi.org/10.1016/j.mspro.2014.07.367 [ISSSN: 2211-8128]

68. D. R. Mishra, A. K. Tiwari, “Effect of Coal and Metal Chip on the Solar Still,” Journal of Scientific and Technical Research , vol. 3, no. 1, pp 1-6. 2013 [ISSN:2230-9926]

69. D. R. Mishra and A. K. Tiwari, “Sunken Effect On Buildings Structures,”i-manager’s Journal on Mechanical Engineering, 2(2), 41-45. 2012 https://doi.org/10.26634/jme.2.2.1570 [ISSN Print: 2230-9055, ISSN Online: 2249-0744]

70. P. Sharma, S. Singh, D. R. Mishra, D. Sharma, “Optimization of Multi-Response Parameters of Inconel 600 on EDM using Rotary Brass Hollow Tubular Electrode by Taguchi Method,” Journal of Scientific and Technical Research, vol. 2, no. 2, pp 20-32, 2012 [ISSN:2230-9926]

71. M. S. Sodha and D. R. Mishra, “Shape Factor of Bermed Wall,” Heat and Mass Transfer, vol. 47. No. 9, pp.1143-1146, 2011. https://doi.org/10.1007/s00231-011-0782-z [Impact Factor: 2.464] [SCI] [ISSN: 0947-7411]

72. D. R. Mishra, M. S.Sodha and A. K. Tiwari, “Validation of basis of experimental simulation of a heat transfer between a building and surrounding earth,” Journal of Solar Energy Society of India (SESI), vol. 21 no 1&2 , pp.36-48, 2011. [ISSN: 1945-9203]Invited Talks

CONFERENCES:

1. Mishra, D. R., Sauda, A., & Tomar, S. (2023). Natural farming of oak lettuce through hydroponic self- sustainable green house. In E. İ. ŞAHİN (Ed.), 4th International black sea modern scientific research congress. IKSAD Publications.

2. D. R. Mishra, A. K. Srivastava, N. Pandey (2022). Comparative Analysis of The Modern And Conventional Building Structures For The Arid Regions, “IArcSAS” 2nd International Architectural Sciences and Applications Symposium. Turky

3. D. R. Mishra, D. K. Shukla, S.Tiwari (2022). Noval Structure of Poly Covered Naturally Ventilated Greenhouse for Agro Applications, “IArcSAS” 2nd International Architectural Sciences and Applications Symposium. Turky

4. A. K. Sahoo, D.R. Mishra (2022) Multi-Attribute Optimization of EDM Drilling Process Parameters on Nitinol Using GRA-Assisted PSO, 2nd. International Architectural Sciences and Applications Symposium (IArcSAS-2022), 1259-1276

5. A.K. Sahoo, D. R. Mishra (2022) Multi-response optimization of EDM drilling of nitinol submerged in distilled water using gra and taguchi analysis, 2. Baskent international conference on multidisciplinary studies, February 24-25, 2022, Ankara Turkey

6. D. R. Mishra, P. Dumka, S. Sharma, H. Gautam (2022) Impact of wax-filled glass bottles on the performance of conventional solar still, ISPEC 9th International Conference Agriculture, Animal Science and Rural Development, 19-20 MARCH, 2022

7. A. K. Sahoo, D. R. Mishra (2022)Multi-objective optimization of EDM drilling process on NiTi-alloy through GRA and PSO a hybrid approach, ISPEC 9th International Conference Agriculture, Animal Science and Rural Development, 19-20 MARCH, 2022.

8. P. Dumka, H. Gautam, S. Sharma, C. Gunawat, D.R. Mishra (2021)Estimation of heat transfer internal heat transfer coefficients of conventional solar still augmented with solar pump, proceeding of the Istanbul International Modern Scientific Research Congress –II, 274-280.

9. D. R. Mishra. Utilization of nanomaterial’s for enhancing the productivity of solar distiller units, World Nanotechnology 2019, Dubai, UAE. APRIL 15-17, 2019

10. S. Gupta, A. Bajaj, A. Sharma, D. Prakash, R. Bisht, G. D. Gautam, D. R. Mishra. Simultaneous Optimization of kerf quality characteristics in Pulsed Nd: YAG Laser Cutting of Hybrid Composites by Using Genetic Algorithm, 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST 2019) with Theme of Advances in Mechanical Engineering, 18-22 Feb, 2019 at National Institute Of Technology, Kurukshetra.

11. A. Sharma, A. Bajaj, D. Prakash, R. Bisht, S. Gupta, G. D. Gautam, D. R. Mishra. Multiple kerf quality optimization in Nd:YAG laser cutting of Basalt/Kevlar-29/Carbon fiber composite using grey relational analysis, 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST 2019) with Theme of Advances in Mechanical Engineering, 18-22 Feb, 2019 at National Institute Of Technology, Kurukshetra.

12. S. Gupta, A. Bajaj, A. Sharma, D. Prakash, R. Bisht, G. D. Gautam, D. R. Mishra. Multi-Response Parametric optimization in Pulsed Nd: YAG Laser Cutting of Kevlar-29/Basalt/Glass fiber composite by Using Genetic Algorithm, 7th International Conference on “Wallop of Globalization in Engg-Medi-Sci-Agri-Pharm-Tech Research”, on 27-28 February 2019, organised by Swami Vivekanad University, Sagar

13. M. Dubey, Kunal, P. Jain, P. Kumar, S. Vats, D. R. Mishra. Performance analysis of single slope solar still augmented with the roller and belt conveyor, Solaris 2019–India Renewable Energy and Sustainable Climate 7-9 Feb, 2019 at atJamiaMilliaIslamia - A Central University, Delhi.

14. P. Dumka, Prince Goyal, K. Mishra, G. Goswami, M. Parashar, D. R. Mishra. Investigation of the performance of single slope solar still at different salt concentrations, Solaris 2019–India Renewable Energy and Sustainable Climate 7-9 Feb 2019 at JamiaMilliaIslamia - A Central University, Delhi.

15. P. Dumka, D. R. Mishra. Techno-economic analysis of CSS and MSSIE for sea coastal area, 6th World Conference on Applied Science, Engineering and Technology (WCASET-18) 2nd& 3rd January, 2018 GOA, INDIA. WCASET_37805 [ISBN:978-81-932966-9-1] [Editor: Dr. Nalini Chidambaram]

16. M. Sharma, A.K. Tiwari, D. R. Mishra. Sand Bed Solar Stills for Coastal Areas: Studying Heat and Mass Transfer using ANN Model, 6th World Conference on Applied Science, Engineering and Technology (WCASET-18) 2nd& 3rd January, 2018 GOA, INDIA WCASET_79341.[ISBN:978-81-932966-9-1] [Editor: Dr. Nalini Chidambaram]

17. M. Sharma, A. K. Tiwari, D. R. Mishra. Experimental evaluation of single basin solar still coupled with the ground earth surface using artificial neural network, in India Renewable Energy Sources for Sustainable Climate Solaris 2017 at Varanasi, India, on 7th -9th Feb 2017.

18. V. Tiwari, D. R. Mishra. Multi response optimization of EDM parameters for MONAL K-500, 19th International Conference on Production, Mechanical and Automobile Engineering (ICPMAE-2016), held in Gujrat, 19th -20th June, 2016.

19. D. R. Mishra, A. K. Tiwari. Shape factor of fully buried axis symmetry structures using thermal simulation method, 4th International conference on Challenges in Environmental Science and Technology, IC-CEST-2016, 27th& 28th Feb., 2016, SVNU, Sagar, [Ref./SVNU/2016/PP-09]. [Publisher: ][Page no: ][Editor: ][Organized by:]

20. S. Gandhi, D. R. Mishra. Review on stepped spillway and baffle blocks as energy dissipater in gravity Dams, 4th International conference on Challenges in Environmental Science and Technology, IC-CEST-2016, 27th& 28th Feb., 2016, SVNU, Sagar, [Ref./SVNU/2016/PP-138].

21. V. Tiwari, D. R. Mishra. Response optimization of EDM parameters for Monel K-500, 4th International conference on Challenges in Environmental Science and Technology, IC-CEST-2016, 27th& 28th Feb., 2016, SVNU, Sagar, [Ref./SVNU/2016/PP-137].

22. D. R. Mishra, A. K. Tiwari. Performance Evaluation of conventional and sand bed ground solar still and effect of covering by black polythene sheet and coal powder on nearby surfaces of sand bed solar still, 3rd International conference on Recent Trends in Science & Technology, IC-RTST-2015, 27th and 28th Feb., 2015. SVNU, Sagar.

23. D. R. Mishra, A. Bhattad, N.K. Samaiya. Electrical stimulation of trapezoidal canals, National conference on Advance materials at Sharda University, Aug 8th -9th , 2014 .

24. A. K. Tiwari, D. R. Mishra. Effect of Covering by Black Polythene Sheet and Coal Power on Nearby Surfaces of Sand Bed Solar Still: Studying Heat and Mass Transfer, HEFAT 2014 10Th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 14th -16th July 2014 Orlando, Florida EFFCET.

25. D. R. Mishra. Experimental simulation of building and surrounding earth, Proceedings of ESS-2013. Organized by Department of civil Engineering at Jaypee University of Engineering and Technology, Guna during 30th -31st March, 2013.

26. D.R. Mishra, V. Jha, A. Chandrakar, R. Sahu, A. Masand, S.L. Sahu. Ground Earth – Still”, Proceedings of Green Technology for Sustainable Development in Mechanical Engineering & Mechatronics Engineering, AICON 12:47-50, 2012.

27. D.R. Mishra,M. S. Sodha, A. Dixit. Validation of the basis of experimental simulation of heat transfer between a building and surrounding earth, Solaris 2012, an international conference on Energy security, Global warming and sustainable Climate held at BHU during 7th – 9th February, 2012.

28. D.R. Mishra. Shape Factor for DDUA Building, Proceedings of Emerging Trends and Developments In Mechanical Engineering & Mechatronics Engineering AICON 11: 78-82, 2011.

29. D.R. Mishra.Simulation of periodic heat transfer between ground and underground structure, Proceedings of the latest trends & developments in Mechanical Engineering AICON’09, pp. 12-16, 6th -8th February, 2009.

30. D.R. Mishra, participated in national conference on state of art of technologies in mechanical engineering organized by department of mechanical engineering at Bhilai Institute of Technology, Durg (BITCON-2008) during 7th -8th November, 2008.

31. D.P. Mishra and D.R. Mishra.Developing Web-Based Courses for Engineering Institutions, Proceedings of National Conference BITCON 2007, organized by Department of Computer Application BIT, Durg, during 16th -17th March, 2007.

32. D.R. Mishra and A. Arora. Process Planning for Shape Deposition Manufacturing Process, Proceeding of Recent trends and breakthrough Development in Mechanical Engineering. BITCON 2007:PP 105-112 organized by Department of Mechanical Engineering, BIT, Durg, during 16th -17th March, 2007.

33. D.P. Mishra D.R. Mishra,and N. Bahadure. Role of WLAN in Engineering Education, Proceedings of advanced computing techniques, BITCON-2007:PP 79-82, organized by Department of Computer Science and Engineering, BIT, Durg, during 16th -17th March, 2007.

34. D.R. Mishra, A. Sharma and S. Shrivastava. Process Planning for Shape Deposition manufacturing process, Proceedings of National Conference on Recent Advances in Design Engineering (RADE 2007) Organized by Department Of Mechanical & Manufacturing Engineering, MIT , Manipal on 22nd -24th February, 2007.

35. D.R. Mishra, A. Sharma and S. Shrivastava. Biomass Gasification Technology, Proceedings of All India seminar on power generation, organized by the Institution of Engineering (India) Electrical and Environmental Engineering Division Chhattisgarh State Centre, at NIT Campus, G.E. ROAD, RAIPUR (C.G.): PP56-58, held on 20th and 21st January, 2007.

36. D.P. MishraandD.R. Mishra. Maintenance & Troubleshooting of WLAN, Proceedings of All India Seminar on Recent Trends, Systems, Technology and Maintenance Management, Organized by Departmentof Mechanical Engineering,ChhatrapatiShivaji institute of Technology (CSIT), Durg on 6th -7th January 2006.

37. D.P. MishraandD.R. Mishra. WLAN Irrigation System,Proceeding of National Seminar on Application of Appropriate Technology for Rural Development, Organized by Chhattisgarh Swami Vivekananda Technical University Bhilai on 11th-12th February, 2006.

38. D.P. Mishra and D.R. Mishra. Web based Agricultural Expert System, Proceedings of National conference on Emerging Trends in Computer and Electronics Engineering for Rural Development, Organized by CSIT, Durg, on 4th -5th March, 2006.

REVIEWER OF INTERNATIONAL JOURNALS:

1. Applied Thermal Engineering (ISSN: 1359-4311)
2. Acta Polytechnica (ISSN: 1805-2363)
3. Applied Energy (ISSN: 0306-2619)
4. AEJ - Alexandria Engineering Journal (ISSN: 1110-0168)
5. American Journal of Water Science and Engineering (AJWSE); (ISSN: 2575-1867)
6. Desalination (ISSN: 0011-9164)
7. Energy (ISSN: 0360-5442)
8. Environmental Science and Pollution Research (ISSN: 1614-7499)
9. Groundwater for Sustainable Development (ISSN: 2352801X)
10. Scientia Iranica (ISSN: 2345-3605)
11. SSRG International Journal of Mechanical Engineering (ID: SSRG- IJME-1086)
12. Technology and Economics of Smart Grids and Sustainable Energy (ISSN: 2199-4706)
13. International Journal of Application or Innovation in Engineering & Management (IJAIEM) (ID: 1289) (ISSN:2319-4847)
14. Journal of Water Process Engineering (ISSN: 2214-7144)
15. Journal of the Brazilian Society of Mechanical Sciences and Engineering (ISSN: 1678-5878)
16. Journal of Thermal Analysis and Calorimetry (ISSN: 1388-6150)
17. Journal of Energy Storage (ISSN: 2352152X)
18. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences (ISSN: 2289-7879)
19. Multidiscipline Modeling in Materials and Structures (ISSN: 1573-6105)
20. Materials Science for Energy Technologies (ISSN 2589-2991)
21. Process Safety and Environmental Protection (ISSN: 0957-5820)

Workshop/ training program organized:

• AWIM MTTP 2018 on 26th and 27th Oct 2018 at Jaypee University of Engineering and Technology, Guna and Kota respectively in association with the Mahindra and Mahindra

• One day workshop organized on “Support for Entrepreneurial and managerial Development for SMEs through Incubators”, a component of National Competitiveness Programme in collaboration with MSME, Indore at Jaypee University of Engineering and Technology, Guna on 09th March, 2016.

Invited talks delivered

1. An invited talk on "Utilization of nanomaterial's for enhancing the productivity of solar distiller units", has delivered in World Nanotechnology 2019 Conference on 15th April, 2019 at Dubai, UAE.

2. An invited talk on "An overview on active and passive solar stills", has delivered in 6th International Conference on "Pollution and It's Control through Agriculture, Pharmacy, Science and Technology" on 27th-28th February 2018.

3. An invited talk on "Solar water desalination techniques: An overview", has delivered in 4th International Conference on Challenges in Environmental Science and Technology, IC-CEST-2016, at SVNU, Sagar on 27th-28th February, 2016.

4. An invited talk on "Performance evaluation of sand bed single slop solar stills", has delivered in 3rd International Conference on Recent Trends in Science & Technology, IC-RTST-2015, at SVNU, Sagar on, 27th-28thFebruary, 2015.

Short Term Trainingprogram attainded:

1. A short-term training on "Power Generation Overview 660MW supercritical thermal power plant", organized by NTPC Limited (A Government of India Enterprise) at Power Management Institute from 17.12.2012 to 30.12.2012.

2. A short-term training on "660MW simulator training program" organized by NTPC Limited (A Government of India Enterprise) at Power Management Institute from 17.12.2012 to 30.12.2012.